ALTECNO

SAB is a System Group company specialising in the production of pipe fittings and accessories for irrigation, for the water and gas industry and for water drainage.
SAB has a consolidated structural and production base, with a extensive sales network in Italy and worldwide, supplying  to over 80  countries in 5 continents.A new factory was opened in 2007 in Sant’Angelo in Vado (PU), Italy, close to the other System Group plants.
The new structure was the result of an important investment where the best production and logistic technologies were merged to offer products with a high quality/price ratio, and an ever-improving service level. CLIENTS are the most valuable asset to SAB: our technical and sales team is always available to meet your requirements with the expertise, courtesy and kindness that have always been our emblematic feature.

– Pipe fitting : Compression Fittings, Clamp Saddles, Electro Fusion Fittings, Fittings Plug & Play, Repair clamps.
These products are suitable for use with polyethylene pipes PE80, PE100, LDPE, with nominal pressure PN4, PN 6, pn10, pn16.
– Irrigation fitting : Compression Fittings, Clamp Saddles , Layflat hose, Layfit fittings, valves, drippers, tape connectors, barbed connectors, filters.
These products are made in particular for use with LDPE polyethylene pipes with nominal pressure PN4, PN6, pn10.
– Drip tape : drip tapes  Ma.Go., Sky tape, Sabtape.
These products are made from polyethylene MDPE, specific for use in drip irrigation professional.
– Channel Drainage : Drainage channels, grids made of PP, steel grids, cast iron grates.
These products are made of polypropylene, specific for use in installations of surface water drainage.

Fast deliveries

Custom capabilities

Gridiron Spa Unipersonale is a modern and dynamic company specialized in the production, selling and distribution of technical rough gratings, galvanized, painted, stainless steel, fencings and gates, metal plates and manhole covers, gratings channels in vibrated, reinforced and polymer concrete; technical entrance doormats; siphoned gullies, slot channels and stainless steel floor drainage with built-in slope and many other manufactured articles and accessories for building and construction in general.

The robustness and accurate finish faced a growing appreciation by satisfied customers for the service and the quality of our operating philosophy, because GRIDIRON products are present in all the national territory through capillary action, timely and tested of a dense network of agents and distributors served by our fleet of vehicles.

Active in the market since 1979, GRIDIRON develops its activities in five areas for about 30,000 sq-m. and employs approximately 150 people including employees and collaborators.

GRIDIRON built his notoriety and reputation due to its correctness and reliability in respect of their own and others work

The main products are:

• metal plates and manhole covers
• channels in vibrated, reinforced and polymer concrete
•  technical entrance doormats
• siphoned gullies
• slot channels
• stainless steel floor drainage with built-in slope

High quality and precision

High custom capabilities

Fumoso are leading the European and Asian EPS loose-fill raw material markets. 

We have a broad experience in the EPS business. We have built and sold machinery for expanding our SPAN-PACK^® products.

Today we have two modern production plants located in Sant Feliu de Llobregat and Parets del Vallés (Barcelona), Spain. 

Fumoso is well known in the international EPS community. You are invited to ask about our irrefutable reputation

Our clients range from very small to multinational companies with a broad range of customers and suppliers.

We pay personal attention to all our customers whom we treat equally whether it is a small business or a large organization.

► Drainage - drenotube^® is a specific draining geocomposite for performing longitudinal in-ditch drainages, replacing the French drain. No gravel is needed.

► Expandable Polymers - Expandable polystyrene sold under the trade mark SPAN-PACK^®.

► Packaging (molded parts) - Custom made for electronics and the chemical industry: Boxes, trays and other standard products.

► Packaging (loose-fill) - Two expansion facilities nearby Barcelona. Useful void fill EPS shaped particles.

► Decorative items - Ceiling tiles, XPS moldings, ceiling centres, insulation sheets.

► EPS spheres - Wide diameters range.

The ESSMANN GROUP, with the companies ESSMANN Gebäude-technik GmbH, ECODIS SAS and STG-BEIKIRCH GmbH & Co. KG, is one of the leading manufacturers in Europe of pro-ducts and system solutions for natural lighting, aeration and ventilation, as well as for natural and mechanical smoke and heat extraction in industrial, commercial and administration buildings

Products and accessories for flat roofs

• Smoke and heat extraction windows and hatches
• Natural light and air windows and hatches
• Roof gullies

Sophisticated solutions and service

Custom capabilities

The System Group can be traced back to 1979 when the Centraltubi works, with its small extrusion line, started producing the first polyethylene pipes. Today, after 30 years of activity, the System Group now has 12 production centres and sales offices in 4 different countries, as well as a workforce of over 600 personnel who work with the same enthusiasm as they did during the first years of activity, all contributing to making the System Group a leader in the supply of complete and innovative polyethylene and polypropylene pipes and channelling systems in 30 countries.

The group’s range of products includes pipes in HDPE, MDPE and LDPE for water, irrigation, gas, drainage, double wall corrugated pipes in HDPE and PP for sewers and drainage, double wall corrugated pipes in HDPE for the cable protection, spiral pipes in HDPE up to 2500 mm diameter, multi-wall pipes for heating and plumbing, tanks for buried civil and industrial effluent, above and below ground water storage tanks, treatment plants, inspection chambers in HDPE, fittings, drainage channels, products for irrigation and specials.

Solutions for Water Management

• Pipes in HDPE, MDPE and LDPE for water, irrigation, gas, drainage, sewers 
• Double wall corrugated pipes in HDPE for the cable protection
• Spiral pipes heating and plumbing 
• Tanks for above ground and buried civil and industrial effluent
• Inspection chambers and fittings
• Drainage channels
• Products for irrigation and specials.

High custom capabilities

Very wide range of products and solutions

About Payza Foundary

     Our  firm  has been founded  and started its activity by late founder Mr MEHMET PAYZA on  300 meter sqaure meter workshop  by casting ductile iron. Throgh developments over the years we increased our settlement  area  with investments to 52.000 meter square including 22.000 square meter closed area at the end of 2013.

     Furthermore, our firm decided to invest on machinery in this year  and operationalized  DISA 280-C moulding machine that  has largest molding size and  the highest speed  in the world. With these investment and aim to  achieve the goal  as 35.000 ton /year. The new facility started production in early 2014 with TS EN 124, ISO 9001:2008, OHSAS 18001:2007, ISO 14001:2004 Certifications .

Cast Products for various segments:

• Telecom
• Municipal
• Infrastructure
• Civil Engineering

And many more.... 

Konti Hidroplast is Manufacturer of PE (polyethylene) and PP (polypropylene) pipes.

Konti Hidroplast was founded in 1975 and today is export-oriented, and 95% of its products are exported in international markets.

Besides the experience, for access to the international markets contributed our large range of products and top quality, by all internationally recognized standards. Our current production program covers all fields of application: pipes and hoses for water supply systems, sewage systems, PE and PP manholes, pipes for transporting gas and oil products, pipes and hoses for protection of telecommunication cables, drainage systems and fittings for all dimensions, which also range from a minimum diameter of 12mm up to 2000mm

Konti Hidroplast today play an important role in the domestic and foreign markets with constant presence in major and minor infrastructure projects.

Polyethylene products are available for different applications:

• water supply
• sewage
• gas
• telecommunications

Polypropropylene products are available for:

• water supply – warm water
• sewage

A modern company, with long standing experience in the production of Trapped drains, Drainage channels with gratings, Slot channels, Spray balls and Floats, in stainless steel.

Caggiati's wide range of products is the result of the expertise and technology developed in over 20 years of work aimed at satisying the demands of our customers.

The high quality standard of our products has earned the trust of Italian and international companies.

Stainless Steel Drainage products

• Drainage Channels
• Slot Drainage Channels
• Floats
• Floor Drains
• Spray Balls

High custom capabilities